The installation solution of led area light is limited by many objective conditions, and many factors need to be considered, such as road width, traffic flow, traffic speed, street light led area light power, etc.
The installation of led area light must ensure sufficient brightness and avoid glare. From the technical and economic considerations, the best led area light installation solution is obtained.
In general, to prevent glare, the height of led area light should not be lower than 4.5 meters, the distance between led area light poles should be 25-30M, and the distance of led area light poles should be reduced at the corners. The light should extend 0.6-1m from the road surface. The horizontal angle is 5-15 degrees, and each led area light pole has independent short-circuit protection.
led area light is usually installed on one side, centerline, and on both sides.
When mounted on one side, the led area light angle can be increased to 15 degrees.
When the road width is 12-15M, led area light can be installed on the center line.
When the road is wider than 15M, it can be installed at an elevation angle or on both sides.
Near the crosswalk 50M, led area light brightness should be more than 30LX .
The above are the of led area light installation regulation. More solutions, Follow Ledsolution!